Walk-in showers
A walk-in shower with a low curb or a curbless entry, a sloped pan, and a linear or center drain. Glass, tile, and a bench or niche are fitted to the space, and blocking is set in the walls for grab bars where you want them.
Shower remodeling in Los Angeles rebuilds the shower itself: the pan, the drain, the waterproofing, the tile, and the enclosure, as one job rather than a series of patches. Whether you want a walk-in shower, a replacement on the same footprint, or a new enclosure, the work starts below the tile. Call for a free written estimate, or see bathtub to shower conversion if the tub is coming out too. Our planning guide walks through the five things to settle before the shower is rebuilt.
Shower remodeling in Los Angeles is work focused on one part of the bathroom: the shower itself. The existing shower comes out, the walls and pan are rebuilt with proper waterproofing, and a new shower goes in with the enclosure, valve, and finishes you choose. The rest of the room stays in place unless the shower work reaches it. It suits a bathroom whose layout, vanity, and toilet are fine, but whose shower leaks, looks dated, or is hard to step into.

A shower is a wet room inside a room. The pan slope, the membrane, and the drain decide whether it stays dry behind the tile. We rebuild those layers first, then set tile, glass, and trim on top of work that has already been tested.
We handle walk-in showers, shower replacement, shower enclosures, and shower installation as one service. The work starts with the pan and the membrane, because a shower that is not waterproofed correctly will fail no matter how good the tile looks. Every shower we build is flood-tested before tile goes down.
How this differs from a tub-to-shower conversion: a bathtub to shower conversion starts by removing a bathtub. Shower remodeling works on an existing shower, or builds a shower where the shower area already sits. If the job is removing a tub and building a shower in its place, see Bathtub to Shower Conversion. If the shower itself is the problem, this is the service for it.
Every Shower Remodeling job we run is scoped in writing before work starts, with haul-away handled where the work requires it. The items below are what the service covers.
A walk-in shower with a low curb or a curbless entry, a sloped pan, and a linear or center drain. Glass, tile, and a bench or niche are fitted to the space, and blocking is set in the walls for grab bars where you want them.
The old shower unit, tile, and pan come out and a new shower goes in on the same footprint. Walls are rebuilt with backer board and membrane, and the valve and drain are replaced rather than reused.
Frameless glass, framed glass, or a curtain arrangement, measured to the finished opening. Glass is fitted after tile, so the panels sit square and the door closes cleanly.
A new shower installed where the plumbing and drain allow it, with a new valve, trim, showerhead, and drain assembly. The enclosure and finishes are installed as part of the same job, not left to a second visit.
Cement backer board, a bonded waterproof membrane, and a flood-tested pan sit under every shower we build. Tile is set over that system, grout is sealed, and joints at every change of plane get silicone caulk.
The pan, the drain, the waterproofing, the tile, and the enclosure, as one job rather than a series of patches.
The pan is flood-tested before any tile goes down.
The valve and drain are replaced rather than reused.
Every job starts with a free written estimate after we see the shower.
We look at the existing shower, the pan, the drain, and the walls around it, checking for soft flooring and water staining. We measure the opening and agree the plan for the pan and the enclosure before anything is priced.
You get a written scope for the shower work, including the pan, membrane, valve, enclosure, and tile. Glass and tile are selected together so the finishes match, and lead times are confirmed before a start date is set.
The old shower comes out, damaged framing or subfloor is repaired, and the new pan, drain, and membrane go in. The pan is flood-tested before any tile goes down.
Tile is set over the waterproofed walls and pan, grout is sealed, and the enclosure, showerhead, and trim are installed and tested for leaks at every joint.
We run the shower, check the drain and the glass, and walk the space with you. You receive a written workmanship warranty and our direct line for anything that comes up after.
Most calls we get start with a leak, a stain, or a fixture that stopped working. Here are the problems this service fixes, and what happens if they are left alone.
Ask a pro →A failed pan sends water into the subfloor and the room below. Rebuilding the pan with the right slope and a tested membrane stops the leak at its source instead of covering it with new tile.
Cracked tile and crumbling grout usually mean water is getting behind the surface. A shower remodel rebuilds the walls and the waterproofing behind the tile, so the new finish has a dry base to sit on.
A high tub wall or a narrow opening makes a daily shower harder than it needs to be. A walk-in shower with a low curb or a curbless entry removes that step and opens the space.
A valve that runs hot and cold, or a showerhead with weak flow, points to worn parts behind the wall. Replacing the valve and trim during a remodel fixes the controls, not just the look.
| the size of the opening |
| whether the drain moves |
| the pan and waterproofing work |
| the enclosure type |
| the tile and trim you choose |
| the condition of the framing and subfloor underneath |
A walk-in shower with a new drain position is a different job from a replacement on the same footprint, and the condition of the framing and subfloor underneath also shapes the scope.
Every job starts with a free written estimate after we see the shower, so the scope and the price are in writing before any work begins.
See bathtub to shower conversion if the tub is coming out, bathroom remodeling for the full room, and the areas we serve.
Call with your ZIP code and we will confirm coverage before booking an estimate.
Shower remodeling includes the pan, the drain, the waterproof membrane, the valve and trim, tile, and the enclosure, built as one job. It can be a walk-in shower, a replacement on the same footprint, or a new enclosure, and the scope is agreed in writing before work starts. The scope depends on where the water is getting in — a failed joint, a failed pan, or waterproofing behind the tile that needs rebuilding — which is checked on the estimate visit.
The cost depends on the size of the room, how much of the layout changes, whether plumbing or electrical work moves, the tile and fixtures you choose, and what we find behind the walls. That is why every job starts with a free written estimate after we see the room: you get the scope and the price in writing before any work begins, and we explain the cost in detail on the call. When you compare quotes, compare the scope line by line: one quote may price a finish as fixed while another holds it as an allowance that can change later.
Often, yes. It depends on the opening, the drain position, and the floor build-up, which we check on the estimate visit. If a walk-in entry fits, we plan the pan slope, the drain, and the glass to the finished opening, and agree the scope in writing before work starts.
Frameless glass, framed glass, and curtain arrangements each suit different rooms and budgets, and the choice depends on the opening, the tile, and how the room is used. Glass is measured after tile, so the panels fit the actual opening. We walk through the options with you on the estimate call and list the choice in the written scope.
Run the exhaust fan during and after showers, wipe down glass and tile so water does not sit, and check caulk lines and grout now and then for gaps. If a joint opens or a valve starts to drip, call before water gets behind the wall. We are open 24 hours, 7 days a week.
Whether a permit is needed depends on the scope of the work and the city your home is in (in the City of Los Angeles, that is the Department of Building and Safety; other cities have their own building departments, and unincorporated areas go through Los Angeles County) Work that moves plumbing, electrical, or structure is the kind that usually needs one, while a like-for-like swap often does not. We confirm what your shower remodeling job needs before work begins, so there are no surprises. If you own a condo, your homeowners association's approval is separate from a city permit, so bring your HOA's rules to the free written estimate.
The shower pan is the sloped base under the tile that carries water to the drain, and the waterproofing membrane is the bonded layer over the pan and walls that keeps water out of the structure. A failed pan sends water into the subfloor and the room below. That is why a shower remodel rebuilds the pan, the drain, the waterproofing, the tile, and the enclosure as one job, with the right slope and a tested membrane, instead of covering the problem with new tile.
Licensed, insured, and ready 24/7, with a written workmanship warranty on every bathroom job. Call now and we will schedule a free written estimate. Free estimates are scheduled Monday through Friday, 8:00 AM to 6:00 PM.
Get Free Estimate +1 619-960-0868 →Call +1 619-960-0868 or send us a message and we will get back to you. Estimate requests are accepted anytime. Free estimates are scheduled Monday through Friday, 8:00 AM to 6:00 PM. Tell us what is going on with your bathroom and we will bring the right crew.